Skip to content Skip to footer Show sitemap
Logo Posch Leibnitz GmbH
Login
Dealer search
Home / Products/Billet handling/Cleaning

LogFix 15

Cleaning

LogFix – the experts in clean firewood! Higher profits, better quality! The LogFix log cleaner ensures your logs are consistently clean. Rotating rollers reliably remove unwanted chips, bark and wood splinters from every log, resulting in noticeably better firewood quality. It pays off: Higher prices and satisfied customers included. The LogFix is available in three sizes – 15, 30 and 60 – to suit different processing volumes.
Request product

Log length max.

50 cm

Cleaning capacity max.

15 srm/h

Dead weight

from 780 kg

Screening and feeding function

The sieve unit is the central component of the LogFix and is responsible for the actual cleaning function. It consists of several screening shafts arranged side by side, which are mounted at a distance from one another such that the screening discs overlap. Every second wave is axially offset, which precisely defines the fixed screening width. The screening shafts, fitted with square screening discs welded on at an angle, run in solid cast housing bearings and guarantee maximum stability. A powerful gearbox or hydraulic motor drives a shaft, whilst robust sprockets and roller chains reliably transmit the power to all subsequent shafts – ensuring consistently high performance. As they rotate, the screening shafts create a dynamic vibrating motion that loosens the logs, thereby efficiently removing impurities. The screened material falls reliably through the gaps between the screen bars. During the cleaning process, the logs are continuously conveyed along the line and then discharged at the outlet – without the need for any additional feed unit.

Tilt adjustment

The ability to adjust the tilt of the screen surface allows the transport speed of the logs over the screening rollers to be controlled, thereby also influencing the cleaning efficiency. The steeper the angle of the screen surface is set, the longer the logs remain on it. This increases the cleaning time and results in even cleaner logs. The tilt of the log screen can be adjusted from 0 to 10 degrees by raising the screening unit slightly using a lifting tool and releasing the locking tabs. The sieve unit can then be adjusted to the desired tilt by raising or lowering it using the lifting tool, and subsequently secured in place with the locking tabs.

Height-adjustable base frame

The height-adjustable feet of the base frame can be adjusted by up to 1300 mm to allow for individual adjustment of the feed and ejection heights. The desired position is fixed easily and with safety in 100-mm increments using bolts. Clamping screws in the base frame’s guide tube further secure the adjustable feet without any play, thereby ensuring that the machine is set up stably. To perform a height adjustment, the machine must be lifted using a suitable lifting tool.

Filling hopper

The side walls of the filling hopper ensure that the logs fed in via the conveyor belt remain entirely on the screen surface and do not fall out at the sides. This elevates health and safety at work and keeps the work area clean. Shovel feeding is not possible with the LogFix 15.

Precise ejection of the logs

A chute at the end of the screen surface ensures that the cleaned logs are discharged and transferred cleanly, for example into the feed hopper of a PackFix. On one side, the chute is shaped like a comb, so that it fits perfectly around the shape of the screen discs on the screen shaft. This prevents logs from becoming jammed between the screening shaft and the chute, or pieces of wood that are too large from slipping through.

Central collection of the splinters

The waste hopper ensures a clean workplace by allowing the screened-out waste to be collected at a central point beneath the LogFix, thanks to its funnel shape. These can either fall into a container provided by the customer, be collected in a BigBag using an optional BigBag holder, or be transported away via a conveyor belt positioned underneath. In addition, the waste hopper improves safety, as it prevents access to the LogFix 15’s screening shafts from below.

Basic model

Article no. Type Description Drive 1 Dead weight
M8020 E2,2-400
LogFix 15, E2,2-400, log cleaner for separating logs from splinters and chips
Cleaning performance: max. 15 srm/h; drive using a 2.2 kW electric motor, S6, 3x 400 V, 50 Hz, CEE 16 A; motor protection switch with phase inverter for screen start-stop. Screening width: 25 mm (fixed), screen surface: approx. 1400 x 530 mm, 6 rotating rollers, roller speed 70 rpm. Screening angle: Adjustable from 0–10 degrees (fitted at 0 degrees as standard). feeding: Via a conveyor belt with a width of up to 800 mm, filling height: 1.5–2.8 m, ejection height: 0.7–2 m, height-adjustable base frame, fixed waste hopper, forklift attachments, central lubrication rails.
 Electric motor 835 kg
M8021 E2,2-230
LogFix 15, E2,2-230, log cleaner for separating logs from splinters and chips
"Cleaning performance: max. 15 srm/h; drive powered by a 2.2 kW electric motor, S6, 230 V, 50 Hz, CEE 7/3 16 A; motor protection switch for ‘screen start-stop’." Screening width: 25 mm (fixed), screen surface: approx. 1400 x 530 mm, 6 rotating rollers, roller speed 70 rpm, screen tilt: Adjustable from 0–10 degrees (fitted at 0 degrees as standard), feeding: "Via a conveyor belt with a width up to 800 mm, filling height: 1.5–2.8 m, ejection height: 0.7–2 m, height-adjustable base frame, fixed waste hopper, forklift attachments, central lubrication rails."
 Electric motor 800 kg
M8022 PS
LogFix 15, HP, log cleaner for separating logs from splinters and chips
"Cleaning performance: max. 15 srm/h; driven by the tractor’s hydraulic system; a size 2 hydraulic coupling is required for both the forward and return lines; a pressure-free return line is required! Required pump flow rate: 15–18 l/min at 150–200 bar. Control valve for “Screen Start-Stop” and “Screen Return”. Screening width: 25 mm (fixed), screen surface: approx. 1400 x 530 mm, 6 rotating rollers, roller speed 70 rpm, screening angle: Adjustable from 0–10 degrees (fitted at 0 degrees as standard), feeding: "Featuring a conveyor belt with a width up to 800 mm, filling height: 1.5–2.8 m, ejection height: 0.7–2 m, height-adjustable base frame, fixed waste hopper, forklift attachments, central lubrication rails, hoses with a length of 10 metres and hydraulic connectors."
 Tractor hydraulics 780 kg

What speaks for the LogFix

Skip slider
Jump to slider start

LogFix 15 – the compact log cleaner

The LogFix 15 reliably separates logs from wood chips, producing high-quality firewood in no time at all. This compact solution is ideal for cleaning logs produced by firewood processors. The timber is transported evenly to the LogFix end via six rotating rollers. The rollers reliably separate unwanted chips, bark and wood splinters from the firewood. The removed material falls down in a controlled manner, for example directly into a BigBag. Operating at just 70 revolutions per minute, the rollers run particularly quietly, whilst the screen can be operated using the optional wireless remote control, meaning the operator does not need to be in the immediate vicinity of the machine. The LogFix 15 processes up to 15 srm per hour and can be combined with SmartCut, AutoCut, firewood processors, SpaltFix models and firewood conveyor belts.

Easy maintenance

Centralised lubrication rails enable simple, even lubrication of the screen shaft bearings – they reduce wear, extend the machine’s service life and significantly reduce maintenance requirements.

Easy to use

The machine can be switched on and off simply by pressing a switch. An optional radio remote control is available.

Forklift attachments

To ensure safety, the machine can be lifted using forklift attachments on three sides.

Screening and feeding function

The sieve unit is the central component of the LogFix and is responsible for the actual cleaning function. It consists of several screening shafts arranged side by side, which are mounted at a distance from one another such that the screening discs overlap. Every second wave is axially offset, which precisely defines the fixed screening width. The screening shafts, fitted with square screening discs welded on at an angle, run in solid cast housing bearings and guarantee maximum stability. A powerful gearbox or hydraulic motor drives a shaft, whilst robust sprockets and roller chains reliably transmit the power to all subsequent shafts – ensuring consistently high performance. As they rotate, the screening shafts create a dynamic vibrating motion that loosens the logs, thereby efficiently removing impurities. The screened material falls reliably through the gaps between the screen bars. During the cleaning process, the logs are continuously conveyed along the line and then discharged at the outlet – without the need for any additional feed unit.

Tilt adjustment

The ability to adjust the tilt of the screen surface allows the transport speed of the logs over the screening rollers to be controlled, thereby also influencing the cleaning efficiency. The steeper the angle of the screen surface is set, the longer the logs remain on it. This increases the cleaning time and results in even cleaner logs. The tilt of the log screen can be adjusted from 0 to 10 degrees by raising the screening unit slightly using a lifting tool and releasing the locking tabs. The sieve unit can then be adjusted to the desired tilt by raising or lowering it using the lifting tool, and subsequently secured in place with the locking tabs.

Height-adjustable base frame

The height-adjustable feet of the base frame can be adjusted by up to 1300 mm to allow for individual adjustment of the feed and ejection heights. The desired position is fixed easily and with safety in 100-mm increments using bolts. Clamping screws in the base frame’s guide tube further secure the adjustable feet without any play, thereby ensuring that the machine is set up stably. To perform a height adjustment, the machine must be lifted using a suitable lifting tool.

Filling hopper

The side walls of the filling hopper ensure that the logs fed in via the conveyor belt remain entirely on the screen surface and do not fall out at the sides. This elevates health and safety at work and keeps the work area clean. Shovel feeding is not possible with the LogFix 15.

Precise ejection of the logs

A chute at the end of the screen surface ensures that the cleaned logs are discharged and transferred cleanly, for example into the feed hopper of a PackFix. On one side, the chute is shaped like a comb, so that it fits perfectly around the shape of the screen discs on the screen shaft. This prevents logs from becoming jammed between the screening shaft and the chute, or pieces of wood that are too large from slipping through.

Central collection of the splinters

The waste hopper ensures a clean workplace by allowing the screened-out waste to be collected at a central point beneath the LogFix, thanks to its funnel shape. These can either fall into a container provided by the customer, be collected in a BigBag using an optional BigBag holder, or be transported away via a conveyor belt positioned underneath. In addition, the waste hopper improves safety, as it prevents access to the LogFix 15’s screening shafts from below.

Electric drive

The electric motor runs quietly and can be powered by electricity from renewable sources. These solutions help to reduce air pollution and do not produce any harmful exhaust fumes in your working environment. The gear motor is mounted directly onto the screen shaft and is securely fastened in place by a torque plate to ensure safety. This eliminates the need for additional drive components, which reduces wear and tear and makes maintenance considerably easier. The built-in motor protection ensures a long service life by protecting against thermal overload. In the 3x 400 V version, a phase inverter allows the direction of rotation to be easily reversed. In addition, electric drives offer significant cost savings compared with conventional internal combustion engines. The electric motor’s low energy consumption reduces operating costs. As the machine is easy to maintain, this reduces maintenance costs, increases its uptime and minimises the need for repairs and spare parts, leading to further cost savings in the long term.

Special equipment

  • Standard
  • Optional
  • Not available
Article no. Description E2,2-400 E2,2-230 PS Dead weight
SO1165
Radio remote control
The on/off function of the screening rollers; the operation of the screen is monitored via the indicator light. Manual reverse rotation of the screening rollers, controlled directly from the control box. Consisting of a radio remote control powered by standard batteries, a control box with a push-button for bridge return and a signal light. Note: Not suitable for type PS.
 5 kg

Greater flexibility and efficiency in day-to-day work

The machine can be operated using the optional radio remote control, without the operator having to be in the immediate vicinity of the machine. This control allows the screening rollers to be switched on and off very easily using two buttons. As well as the convenient radio control, the screening rollers can also be switched on and off using two buttons located directly on the machine. This enables the operator to use the system fast and easily on site at any time. Should a piece of wood ever become jammed, the screening rollers can simply be switched to reverse at the control box, allowing the wood to be released fast and safely. The reverse movement only continues whilst pressure is applied to the button. This prevents the device from running continuously by mistake. The transmitter is powered by standard batteries and does not require a built-in rechargeable battery. The batteries can be replaced fast and cheaply. The built-in indicator light provides immediate feedback on the LogFix’s operating status at all times: A green light indicates that the machine is operating correctly, whilst a red light immediately signals a fault. This clear visual feedback elevates operational safety – even from a distance or in noisy environments.

Accessory equipment

  • Standard
  • Optional
  • Not available
Article no. Description E2,2-400 E2,2-230 PS Dead weight
F0004689
Fine screen
For logs less than 25 cm long and with a diameter of less than 7 cm. Consisting of a screen frame with metal struts between the screen discs, including fixing materials.
 70 kg
F0004634
Slide extension
Up to 990 mm in length, transfer height 150–1450 mm. Consisting of 3 slide elements, each with a length of 330 mm, 7 brake chains with retaining brackets, including fixing materials. Note: Cannot be used in conjunction with the SF3/SF5 conveyor belt.
 75.3 kg
F0004772
Foldable slide
For filling a PackFix filling drum. Consisting of a fold-away slide, an operating lever with a magnetic locking mechanism and 2 connecting brackets.
 60 kg
F0004690
Hook
For suspending a BigBag. Comprising 4 hooks, including fixing materials.
 7 kg

LogFix 15 in action
+11

POSCH has the right machine for every application.

Skip slider
  • LogPack circle
    Log length max. 50 cm
    Output per operator max. up to 10 srm/h
    Dead weight from 270 kg
  • SpaltFix S-376
    Log diameter min. 7 cm
    Log diameter max. 36 cm
    Max. trunk length 5 m
    Processing output max. 20 srm/h
    Splitting system MULTI
  • SpaltFix S-376 mobil
    Log diameter min. 7 cm
    Log diameter max. 36 cm
    Max. trunk length 4 m
    Processing output max. 20 srm/h
    Splitting system MULTI
Jump to slider start

Search
YouTube is deactivated
We need your consent to use YouTube videos. For more information, see our Privacy Policy.
Vimeo is deactivated
We need your consent to use Vimeo videos. For more information, see our Privacy Policy.
Google Maps is deactivated
We need your consent to use Google Maps. For more information, see our Privacy Policy.