Home / Products/Splitting/Short log splitter

SpaltAxt 8

Short log splitter

The SpaltAxt is a tried-and-tested classic for producing firewood. Compact, manoeuvrable and fast to be used, it splits short trunks efficiently and safely with a splitting force of up to 8 tonnes using a two-hand control system. Practical wheels and the three-point linkage ensure maximum mobility and flexible deployment options, so your machine can be where it’s needed in no time at all.

Read more Read less

Request product

Log diameter max.

40 cm

Log length max.

55 cm

Splitting force max.

7.2 t

Fast forward

5 cm/s

Return

46 cm/s

Possible annual quantity

up to 20 srm

Dead weight

from 142 kg

2-way slotted blade with integrated log-holding tip

The 200 mm-length splitting blade, which slopes diagonally forwards, prevents the wood being subjected to pressure from the operator whilst also reducing the effort required to split the wood. Do you also work with thin or diagonally cut timber that tends to fall over easily? The wood clamping tip secures it effortlessly for the splitting process.

Simple and tool-free splitting stroke adjustment

Unnecessary empty runs when splitting short timber cost time! Work more efficiently by simply adjusting the splitting stroke to the desired log length at a comfortable operating height – without any tools and in a single simple step.

Easy transport by hand

Stay mobile: The large solid rubber wheels (300 mm in diameter) and the standard support wheel ensure excellent stability and allow the SplitAxt to be moved effortlessly on paved surfaces. Another handy feature: The footrest makes it easier to tilt the machine into the transport position.

Wooden trays

Two handy tools to help you when using the SplitAxt: Pieces of wood that are to be split again can be conveniently placed on the two standard wood supports. These are located on the left and right of the machine at an ergonomic height and within easy reach. They also serve as a temporary storage area for split firewood, which can then be transported to the storage area. For space-saving storage and easy transport, the wood supports can be attached to the magnets and spring pins at the designated storage points tool-free.

Working efficiently with the SplitAxt

Are you fed up with all the fiddly steps involved in cutting the wood into small enough pieces? With the SplitAxt, you can efficiently manoeuvre the trunk into the desired position – either by moving the two-handed control back and forth or by simply rotating the trunk on the splitting table.

Compact when stored, powerful when in use

Not much storage space? For space-saving storage and transport, the blade guide tube can be retracted and the wood supports can be attached to the magnets and spring pins at the designated storage positions tool-free.

Basic model

Data table

Article no.	Type	Description	Drive 1	Drive 2	Fast forward	Return	Splitting force max.	Dead weight
Article no. M6140N	Type E5,5-400 Turbo	Description SpaltAxt 8, E5.5-400 Turbo, vertical log splitter for short timber with 7.2 t splitting force Drive with 5.5 kW electric motor, S6, 3 x 400 V, 50 Hz, CEE 16 A, motor protection switch with phase inverter. Compact and ergonomic design with a safety two-handed control and a wood clamping tip, 2-way slotted blade (length 200 mm), tool-free splitting stroke adjustment, max. log length 55 cm, 2 wood trays, 2 handles and 2 solid rubber wheels, as well as 1 solid rubber support wheel for transport Read more Read less	Drive 1 Electric motor	Drive 2	Fast forward 7 cm/s	Return 41 cm/s	Splitting force max. 7.2 t	Dead weight 156 kg
Article no. M6142N	Type E3-400	Description SpaltAxt 8, E3-400, vertical log splitter for short timber with 7.2 t splitting force Drive with 3 kW electric motor, S6, 3 x 400 V, 50 Hz, CEE 16 A, motor protection switch with phase inverter. Compact and ergonomic design with a safety two-handed control and a wood clamping tip, 2-way slotted blade (length 200 mm), tool-free splitting stroke adjustment, max. log length 55 cm, 2 wood trays, 2 handles and 2 solid rubber wheels, as well as 1 solid rubber support wheel for transport Read more Read less	Drive 1 Electric motor	Drive 2	Fast forward 5 cm/s	Return 31 cm/s	Splitting force max. 7.2 t	Dead weight 142 kg
Article no. M6141N	Type E3-230	Description SpaltAxt 8, E3-230, vertical log splitter for short timber with 6 t splitting force Drive with 3 kW electric motor, S6, 1 x 230 V, 50 Hz, CEE 7/3, 16 A, direct start with motor protection. Compact and ergonomic design with a safety two-handed control and a wood clamping tip, 2-way slotted blade (length 200 mm), tool-free splitting stroke adjustment, max. log length 55 cm, 2 wood trays, 2 handles and 2 solid rubber wheels, as well as 1 solid rubber support wheel for transport Read more Read less	Drive 1 Electric motor	Drive 2	Fast forward 5 cm/s	Return 26 cm/s	Splitting force max. 6 t	Dead weight 146 kg
Article no. M6162N	Type PS Turbo	Description SpaltAxt 8, HP Turbo, vertical log splitter for short timber with 7.2 t splitting force at 250 bar Drive powered by the tractor’s hydraulic system; a size 3 tractor hydraulic coupling is required for forward and return operation, complete with connecting hoses and hydraulic connector. Non-pressurised return movement necessary! Max. pump flow rate: 16 l/min. Compact and ergonomic design with a safety two-handed control and wood clamping tip, 2-way slotted blade (length 200 mm), tool-free splitting stroke adjustment, max. log length 55 cm, 2 wood trays, three-point linkage, Cat. I + II, 2 solid rubber wheels, 1 solid rubber support wheel and a removable handle (parking device fitted to the machine) for transport Read more Read less	Drive 1 Tractor hydraulics	Drive 2	Fast forward 7 cm/s	Return 41 cm/s	Splitting force max. 7.2 t	Dead weight 220 kg
Article no. M6166N	Type PZG Turbo	Description SpaltAxt 8, PZG Turbo, vertical log splitter for short timber with 7.2 t splitting force Drive powered by the tractor PTO shaft; required PTO speed 430 rpm; power requirement 5 kW. Compact and ergonomic design with a safety two-handed control and wood clamping tip, 2-way slotted blade (length 200 mm), tool-free splitting stroke adjustment, max. log length 55 cm, 2 wood trays, three-point linkage, Cat. I + II, 2 solid rubber wheels, 1 solid rubber support wheel and a removable handle (parking device fitted to the machine) for transport. PTO shaft required! Read more Read less	Drive 1 Tractor PTO shaft	Drive 2	Fast forward 8 cm/s	Return 46 cm/s	Splitting force max. 7.2 t	Dead weight 170 kg
Article no. M6167N	Type PZG-E5,5-400 Turbo	Description SpaltAxt 8, PZG-E5.5-400 Turbo, vertical log splitter for short timber with 7.2 t splitting force Drive via tractor PTO shaft, required PTO speed 430 rpm, power requirement 5 kW; and drive via 5.5 kW electric motor, S6, 3 x 400 V, 50 Hz, CEE 16 A, motor protection switch with phase inverter. Compact and ergonomic design with a safety two-handed control and wood clamping tip, 2-way slotted blade (length 200 mm), tool-free splitting stroke adjustment, max. log length 55 cm, 2 wood trays, three-point linkage, Cat. I + II, 2 solid rubber wheels, 1 solid rubber support wheel and a removable handle (parking device fitted to the machine) for transport. PTO shaft required! Read more Read less	Drive 1 Hybrid drive: Tractor PTO shaft	Drive 2 Electric motor	Fast forward 8 cm/s	Return 46 cm/s	Splitting force max. 7.2 t	Dead weight 198 kg
Article no. M6168N	Type B3,1	Description SpaltAxt 8, B3,1, vertical log splitter for short timber with 7.2 t splitting force Drive powered by a 3.1 kW petrol engine, with a pull-start starter. Compact and ergonomic design with a safety two-handed control and a wood clamping tip, 2-way slotted blade (length 200 mm), tool-free splitting stroke adjustment, max. log length 55 cm, 2 wood trays, 2 handles and 2 solid rubber wheels, as well as 1 solid rubber support wheel for transport Read more Read less	Drive 1 Petrol engine	Drive 2	Fast forward 5 cm/s	Return 31 cm/s	Splitting force max. 7.2 t	Dead weight 144 kg

What speaks for the SpaltAxt

Skip slider

• 

  Two-handed control

• 

  2-way slotted blade with integrated log-holding tip

• 

  Secure wood fixation system

• 

  Hydraulic tank

• 

  Lashing points

• 

  Safe loading and unloading

Jump to slider start

Two-handed control

The SplitAxt is operated via a safe two-handed control. Technical innovations ensure an efficient cracking process: Integrated metal clamping jaws ensure precise positioning and a secure hold on the material being split to ensure safety. Spring clips prevent the device from sliding towards the operator. In addition, side guards protect against falling timber.

2-way slotted blade with integrated log-holding tip

The 200 mm-length splitting blade, which slopes diagonally forwards, prevents the wood being subjected to pressure from the operator whilst also reducing the effort required to split the wood. Do you also work with thin or diagonally cut timber that tends to fall over easily? The wood clamping tip secures it effortlessly for the splitting process.

Secure wood fixation system

Even smaller logs, which would normally fall over, can be securely held in place by the wood clamping tip on the SpaltAxt 8 or 10 once positioned beneath the splitting blade, making them easy to split.

Hydraulic tank

Easy on your wallet and the environment: The specially designed hydraulic tank ensures efficient cooling, and the ratio of tank capacity to surface area has been optimised. This significantly reduces the amount of hydraulic oil required, making the SplitAxt particularly easy to maintain!

Lashing points

To ensure safe transport, the machine is equipped with lashing points that allow it to be securely fastened to the trailer.

Safe loading and unloading

Not to be taken for granted: The integrated lifting points enable safety and effortless loading and unloading using a lifting tool.

Special equipment

• Standard
• Optional
• Not available

Data table

Article no.	Description	E5,5-400 Turbo	E3-400	E3-230	PS Turbo	PZG Turbo	PZG-E5,5-400 Turbo	B3,1	Dead weight
Article no. SO1505	Description Surcharge for wheel set with pneumatic tyres Diameter 400 mm; to make the machine easier to manoeuvre, the two solid rubber wheels fitted as standard are omitted. Read more Read less	E5,5-400 Turbo	E3-400	E3-230	PS Turbo	PZG Turbo	PZG-E5,5-400 Turbo	B3,1	Dead weight 10 kg

Pneumatic wheel set with pneumatic tyres

Thanks to the larger wheels (400 mm in diameter), this option for pneumatic tyres offers lower rolling resistance when manoeuvring your SplitAxt. The two solid rubber wheels fitted as standard are no longer included.

Accessory

Splitting blade Accessory equipment

• Standard
• Optional
• Not available

Data table

Article no.	Description	E5,5-400 Turbo	E3-400	E3-230	PS Turbo	PZG Turbo	PZG-E5,5-400 Turbo	B3,1	Dead weight
Article no. F0002544	Description Special wedge with rollers Sliding, suitable for SpaltAxt 8 Read more Read less	E5,5-400 Turbo	E3-400	E3-230	PS Turbo	PZG Turbo	PZG-E5,5-400 Turbo	B3,1	Dead weight 4.4 kg

Special wedge with rollers

This extendable special blade with rollers saves effort and time! Thanks to its special shape, the wood springs back fast, thereby reducing the splitting stroke required. The rollers reduce the splitting force required and prevent the split wood from becoming jammed during the return stroke.

Retrofitting

• Standard
• Optional
• Not available

Data table

Article no.	Description	E5,5-400 Turbo	E3-400	E3-230	PS Turbo	PZG Turbo	PZG-E5,5-400 Turbo	B3,1	Dead weight
Article no. F0002581	Description Pneumatic wheel set with pneumatic tyres Diameter 400 mm; to make the machine easier to manoeuvre, the two solid rubber wheels fitted as standard are omitted. Estimated installation time: 2 hours Read more Read less	E5,5-400 Turbo	E3-400	E3-230	PS Turbo	PZG Turbo	PZG-E5,5-400 Turbo	B3,1	Dead weight 9.7 kg

Retrofitting of pneumatic tyres on wheel sets

Thanks to the larger wheels (400 mm in diameter), this option for pneumatic tyres offers lower rolling resistance when manoeuvring your SplitAxt.

SpaltAxt 8 in action

Downloads

POSCH_Katalog_Export_W2004303-DE_SpaltAxt_komp.pdf

1.03 MB | pdf

POSCH_Katalog_Export_W2004303-EN_SpaltAxt_komp.pdf

1.02 MB | pdf

POSCH_Katalog_Export_W2004303-FR_SpaltAxt_komp.pdf

1.02 MB | pdf

Interested? Contact us – we look forward to hearing from you!
Request now without obligation.

Request product

POSCH has the right machine for every application.

Skip slider

• 

  SpaltAxt 6

  Log diameter max.	35 cm
  Log length max.	55 cm
  Splitting force max.	6 t
  Fast forward	5 cm/s
  Return	31 cm/s

• 

  SpaltAxt 10

  Log diameter max.	50 cm
  Log length max.	55 cm
  Splitting force max.	8 t
  Fast forward	8 cm/s
  Return	32 cm/s

• 

  Polly

  Log diameter max.	40 cm
  Log length max.	55 cm
  Splitting force max.	8 t
  Fast forward	19 cm/s
  Return	14 cm/s

• 

  Oscar

  Log diameter max.	30 cm
  Log length max.	55 cm
  Splitting force max.	8 t
  Fast forward	8 cm/s
  Return	22 cm/s

Jump to slider start