SpaltFix S-375 mobile | Firewood processors | POSCH Leibnitz
Menu
Products » Firewood processors » SpaltFix S-375 » SpaltFix S-375 mobile

SpaltFix S-375 mobile
The compact firewood processor with joystick controls.

Posch, SpaltFix S-375 mobile Hover over the image to zoom
  • 37 cm Log Ø max.
  • 12 t Splitting power max.
  • 25 Cubic metres/h
Details
The mobile split cutter SpaltFix S-375 cuts and splits logs up to Ø 37 cm in 2, 4, 6 or 8 parts in one work cycle. The cutting length can be adjusted from 20 to 50 cm. The hydraulic timber feed transports the timber to the circular saw blade via the conveyor belt. Thanks to the feed belt inclined to the rear, the cutting cycle is ideally adapted to the log diameter, which enables maximum performance with small diameters as well. The hydraulic log downholder and the adjustable log stop that lifts during cutting prevent logs from getting stuck. It is easy to operate with a one-hand joystick control. The finished billets are directly transported to loading via an angled conveyor belt. OnlyCut system: As standard, the splitting knife and the splitting knife support can be removed in only a few steps, and so the SpaltFix S-375 can be used as high-performance saw without splitting tool. Integrated log conveyor systems are optionally available.
  • Log diameter 7-37 cm
  • Sawing system WIDIA saw blade ∅ 90 cm
  • Billet length 20/25/30/33/35/40/45/50 cm
  • Hydraulic log feed system with 2-m feeding belt
  • Hydraulic saw feed system with automated stop ventilation and downholder function
  • 4-way splitting wedge as standard, 6-way or 8-way optional
  • Splitting force 12 t
  • Stamp advance/return speed max. 47/42 cm/s with Autospeed
  • Chip extraction connection Ø 15 cm
  • OnlyCut Function (to be used as a pure high-performance saw)
  • TURBO package for increased hourly output (optional)
  • Various chassis options

SpaltFix S-375

Select the right SpaltFix based on drive type. The 4-m angled conveyor belt (article no. KF4) is standard equipment.
Spezial
Article no. Type Propulsion Weight
kg
list price
excl. VAT
M3858KF4
Z
Tractor PTO shaft, power consumption 27 kW, oil pump with a capacity of 66/140 l/min at 480 rpm

Tractor drive: universal shaft required, three-point linkage cat. II

1400 20.500,00
M3878KF4
ZE22D
3x 400V, 50Hz
  • Tractor PTO shaft
  • 22 kW e-motor 400V, S6, CEE 32A, pressure switch-off pump

Combi: Tractor drive: universal shaft required, three-point linkage cat. II, E-drive: with motor circuit breaker and phase inverter

1500 24.000,00
M3878KF4NE1
ZE15-460
3x 460V, 60Hz
  • Tractor PTO shaft, power consumption 27 kW, oil pump with a capacity of 66/140 l/min with 480 rpm
  • 15 kW e-motor 460V/60Hz, pressure shut-off pump. Only suitable for USA/CAN! See Appendix B for details.

The machine is offered with 3x460V/60Hz-drive, CSA-certified e-motor by Wattdrive/WEG and switch with UL- or CSA-certified components for field evaluation by the customer in the USA or the Special Inspection in Canada.

1500 27.100,00
M3884KF4
D30
Hatz 3H50TICD diesel engine (3 cylinder), EU stage V, approx. 30 kW at 1,800 rpm. 1700 49.500,00
M3884KF4NA
D30
Hatz 3H50TIC diesel engine (3 cylinders), EU stage V, approx. 30 kW at 1,800 rpm. Only suitable for USA/CAN! See Appendix B for details. 1650 48.000,00
Make inquiry now or find POSCH partners in your vicinity.
Conveyor belts
Select the right conveyor belt length. The 4-m angled conveyor belt (Item no. KF4) is standard equipment.
Spezial
Article no. Description ejection height
max. m
Weight
kg
list price
excl. VAT
F0
(SO1074)
Reduced price for hydraulic conveyor belt drive (valve block and hydraulic pipes) without conveyor belt. The incomplete machine must not be put into operation without conveyor belt as separating safety device to the splitting area according to EN ISO 13857-Tab. 1! 200 -2.600,00
F15
(SO1062)
Reduced price for single-part ejector belt 1.5 m, hydraulic drive 1.0 100 -1.040,00
KF4
(SO1063)
Angled conveyor belt length 4 m, hydraulic drive, as standard 1.5 - 2.5 1
KF5
(SO1064)
Surcharge for angled conveyor belt 5 m, hydraulic drive 2.0 - 3.0 100 700,00
Chassis
Only possible with initial equipment, incl. assembly.
Spezial
Article no. Description Weight
kg
list price
excl. VAT
T
(SO1053)
Tractor chassis max. 10 km/h without brakes. With par!king brake, drawbar eye 4 cm, hitch height approx. 80 cm, max.drawbar load 1,350 kg. Transport on pubic roads not permitted, only for use on private premises (e.g.lumberyards). Option K3/K4 required 350 3.700,00
TA
(SO1054)
Tractor chassis with overrun brake 2,310-4,360 kg max. 25 km/h, only lof. Drawbar eye 4 cm, hitch height approx. 80 cm, max. drawbar load 500 kg, incl. lightbar. Option K3/K4 required! 400 4.700,00
Z2
(SO1061)
PTO drive front and side. Option T or TA required, only possible with Type Z! 50 2.900,00
A143
Individual permit / Individual type approval (EBE), only possible for Austria and Germany! 1 990,00
Splitting knife
Different splitting knife variants are avilable for efficient working.
Article no. Description Weight
kg
list price
excl. VAT
F0001833
4-way splitting knife (for log Ø 0-37 cm) as standard 22 320,00
F0001826
6-way splitting knife (for log Ø 10-37 cm) 24 390,00
F0001832
8-way splitting knife (for log Ø 17-30 cm) 27 480,00
  • Posch splitting cross - for 6 parts
    Splitting knife for 6 parts
Special equipment
Make your work routine easier with a series of useful additional pieces of equipment.
Spezial
Article no. Description Weight
kg
list price
excl. VAT
A
(SO1190)
TURBO package for 25% more splitting power with billet lengths up to 33 cm: extension of the hydraulic system and a splitting stroke reducer that can be shut off. Available for types Z and ZE 15 1.020,00
C
(SO1065)
Oil cooler recommended for continuous operation (from 4 hours) or for use above 30°C outdoor temperature. Advantage: longer service life of the hydraulic components due to less wear.

Attention! 3-pin continuous current plug 12 V from tractor required

5 980,00
E
(SO1075)
Enhanced hydraulic system for M3858 with triple pump, pressure shut-off valve and hydraulic pipes for subsequent installation of the E-drive (F0003606) 15 450,00
X
(SO1066)
SawControl for automated saw blade speed monitoring to prevent performance peaks / saw overload incl. hour counter. Power supply (12V) from tractor required! 5 990,00
Z
(SO1067)
Additional hydraulic connection for SpaltFix S-375, Type Z, 15 l/min–max. 180 bar. Comprising: 3-way hydraulic pump, hydraulic valve, size 2 quick-connects. Oil cooler: Power supply (12V) from tractor required! 15 1.360,00
  • Posch
    Oil cooler
Accessory equipment
Handy accessory equipment for more power and convenience for wood processing.
Article no. Description list price
excl. VAT
F0003602
Plastic anchorage plate 1.5 cm for standard lengths -1.5 cm 45,00
F0003458
Infeed extension with roller, 100 cm 290,00
F0002942
Log support with lifting device for max. 2 m timber length and Ø 30 cm 1.670,00
F0004341
Conveyor belt with splinter chute 400,00
F0002955
Lights unit, attachable 180,00
F0004069
Reducer for chip extraction connection from Ø 15 cm to Ø 10 cm, SpaltFix S-375 170,00
F0003606
Retrofitting kit for SpaltFix S-375 Type Z to combined drive type ZE22D. E option required! 3.500,00
F0002251
Hour counter for Z-, ZE-drive (Reed-contact), with speed display 320,00
F0001898
Tank heater 230V, required for operation at ambient temperatures under 0°C. Advantage: improved start-up of the machine and greatly reduces wear and tear of the hydraulic system. 680,00
Z2000649
Universal shaft to tractor chassis 280,00
Spare parts
Original POSCH spare parts convince with their accuracy of fit, maximum quality and safety.
Article no. Description list price
excl. VAT
Z1300130
WIDIA circular saw blade Ø 90 cm, 96 teeth, bore 40 mm, 6 mm thick 480,00
F0002767
Infeed belt 390,00
F0004003
Service kit (1,000 h): Set of footrests and filter inserts

Attention! Suitable for SpaltFix from construcion year 2016/37

150,00
Longitudinal conveyor for chassis
Depending on log length, you can choose various versions. The hydraulic drive is provided by the SpaltFix firewood processor. The maximum log length depends on the chosen cross conveyor.
Spezial
Article no. Description log length
max. m
A m Weight
kg
list price
excl. VAT
K3
(SO1055)
Hydraulic chain conveyor 3 m, built-in, min. log length 0.5 m. Option T/TA required!

Option T/TA required!

0.5 - 3 500 3.600,00
K4
(SO1056)
Hydraulic chain conveyor 4 m, built-in, min. log length 0.5 m. Option T/TA required!

Option T/TA required!

0.5 - 4 650 4.150,00
H
(SO1059)
Log lifting device for log lengths up to 2.5 m Option T/ TA and K3 required! 170 1.500,00
H4
(SO1060)
Log lifting device for log lengths up to 4 m. Option T/ TA and K4 required! 250 2.900,00
Cross conveyor for chassis
Select the right cross conveyor in addition to the longitudinal conveyor. The hydraulics is driven by the firewood processor SpaltFix.
Spezial
Article no. Description log length
max. m
B m C m Number
of chains
Weight
kg
list price
excl. VAT
Q2
(SO1057)
Cross conveyor 1.7 m - 2 strands with 1.4 m each, suitable for longitudinal log conveyor 3 m, swivelling with rope winch. Option K3 required!

Option K3 required!

2.5 1.4 1.7 2 300 4.900,00
Q3
(SO1058)
Cross conveyor 3 m - 3 strands with 1.4 m each to longitudinal log conveyor 4m, hydraulically swivelling. Option K4 required!

Option K4 required!

4.0 1.4 1.5/1.5 3 600 8.300,00
Choose your region

The product sortiment of POSCH may vary between regions. Using the right selection you will be provided with the best available products and equipment.

Product inquiry
My data
Salutation
Contact

How may we get in touch with you?

* Required fields

Would you like to tell us something else?
Catalog order
My data
Delivery

How would you like to receive the catalogue?

Confirmation

* Required fields